Reverse osmosis installation

We don’t slack off and are constantly working to get all the important information to you in a timely manner and provide helpful guidance that you can use when deciding which filtration equipment is the best for you, or self-installation. You can find various video tutorials on our YouTube channel. You will learn how to install the reverse osmosis; the instructional videos make changing the filter a breeze. We will train you how to install a water softener bypass and much more. We believe that with our instructions you will be able to handle the installation playfully and without any problems.

Instructional Video on – Reverse Osmosis Installation

On our youtube channel found at instructions on how, with a little skill. install a reverse osmosis system completely independently. Reverse osmosis is considered to be the best water filtration system due to its unique multi-stage water filter in the home. The whole system is based on the removal of unwanted substances, at the same time the water can be improved by an additional filtration stage, which adds extra minerals and adjusts the pH value. 7-stage reverse osmosis Aquafilter, one of our most popular products. The installation procedure can be applied to most reverse osmosis systems as the installation principle remains the same.

What should be kept in mind before starting?

Reverse osmosis is being installed under the kitchen sink. So, first of all, it is important to check that you have enough space in the cabinet under the sink to accommodate the entire reverse osmosis system and easy access to the supply to the water pipes. In the case of reverse osmosis involving UV lamp, or the pump, check the access to the electrical plug. When unpacking, make sure you have all the components listed in the enclosed instructions.

What tools will you need?

• – Drill,
• – 12-hole iron drills, 6-hole iron drill,
• – Knife,
• – French key,
• – socket wrench,
• – Phillips screwdriver,
• – lubricant,
• – a slice from a hacksaw,
• – Teflon thread,
• – 1 to 2 meters of tubing for additional connection of reverse osmosis components.

What you will find in the video

This step-by-step video gives you a complete manual on how to playfully master the installation of reverse osmosis. You will learn how to operate the safety fuses; we will show you the principle of the correct placement of the filter inserts in the filter cylinders, which we will then screw on tightly. The next step is designed to inserting the osmotic membrane. Here it is necessary to make sure that it is securely seated in place to prevent unwanted entry of untreated water into the other filter cylinders.

Using the plastic reverse osmosis holders further installing the UV lamp , which kills dangerous bacteria, viruses and other microorganisms found in your water without adding chemicals (an environmentally friendly way to treat water). Followed by permeate pump installation to reduce wastewater consumption and pump installation , which is suitable for use at low inlet water pressure. Both devices are not included in the package but can be found in our e-shop.

The installation has its continuation under the kitchen sink, where we will also use the drill, while it will not be too complex tasks. We will drill a hole in the waste pipe, for the attachment of the sewer connection, and thread the hose through the drilled hole. In the next stage, we will connect the hose to the tap, for the installation of which we first drilled two 12 mm holes in the sink, at a distance of 18 mm.

In the final stage installing the water tank and flush it. When using reverse osmosis, do not forget to check the water quality regularly, and we recommend measuring the water quality with a TDS meter (measuring the amount of dissolved substances in the water). The long life of the reverse osmosis system and its good condition can be achieved by replacing the filters at regular intervals, as well as by thoroughly disinfecting them with disinfection kit . Instructions on how to proceed can be found in our next video.

Looking for an easier way to install?

If installing and maintaining an Aquafilter reverse osmosis system is a more complicated process for you, but you are still interested in installing your reverse osmosis system yourself, we have a simpler option. We recommend the Aquaphor Morion reverse osmosis system, which can be installed in minutes by connecting the tubing. When replacing the liners, simply press the safety button and without a drop of water you can pull out the old liner and replace it with a new one.

We believe that our videos you will use in practice and they will serve you. However, if you have any questions, please do not hesitate to contact us contact either via the form on our website, by phone, online at the chat, or in person at the branch. Our expert advisors are at your disposal. There are other helpful videos on our YouTube channel that are definitely worth watching and to make sure you don’t miss out on the latest water filter news, subscribe.