Contents
A Simple Guide to Fix Samsung Washer Self Clean Flashing Issue
What is the Samsung Washer Self Clean Flashing Issue?
If you’re a Samsung washer owner, you might have encountered a self clean flashing issue which can be frustrating. This issue happens when your Samsung washer’s self-cleaning cycle fails to complete or runs for an abnormally long time, often resulting in a flashing light on the control panel.
How to fix the Samsung Washer Self Clean Flashing Issue?
To fix the Samsung Washer Self Clean Flashing issue, you can follow these simple steps:
- Cancel the current cycle: To do this, press the “Power” button to turn off the washer, then unplug it from the electrical outlet for at least a minute before plugging it back in.
- Run a calibration cycle: After plugging the washer back in, run a calibration cycle. To do this, press and hold the “Delay End” button for three seconds. Wait for the display panel to change and then release the button. Press the “Start/Pause” button to begin the calibration cycle.
- Check for obstruction: If the self-cleaning cycle still doesn’t complete successfully, check if there are any obstructions in the washer’s drain pump filter. To do this, turn off the washer and unplug it. Locate the drain pump filter on the lower front of the washer and clean it out with a brush or a cloth.
- Call for service: If none of the above steps work, it’s time to call for a Samsung service technician to diagnose and repair any issues with your washer.
A Simple Guide to Fix Samsung Washer Self Clean Flashing Issue
What is Samsung Washer Self Clean?
Samsung is one of the leading manufacturers of home appliances and electronics. One of their popular products is the Samsung Washer. Its self-cleaning feature is highly convenient for homeowners who want to save time and effort. However, as a machine that deals with dirt and grime, it can malfunction sometimes. The Samsung Washer self-clean flashing issue can be a frustrating and alarming problem. The flashing light warns that something sounds in the system, and a quick solution is necessary.
If you’re facing this problem, do not worry. Below is a simple guide to help you resolve the Samsung Washer self-clean flashing issue.
Steps to Fix Samsung Washer Self Clean Flashing Issue
Here are the comprehensive steps to fix Samsung Washer self-clean flashing issue.
1. Check for Residual Water
Samsung Washers have flood protection features embedded in them. Before performing a self-clean, the machine will check for residual water in the tub. If it finds any, the Samsung washer won’t allow self-cleaning. Open the washer lid, and remove any remaining clothes from inside. Observe if there is any water left inside after the wash cycle. If there is, then run the spin cycle to remove the water.
2. Clean the Washer manually
Over time, dirt and grime can accumulate inside the washer’s drum, leading to a self-clean flashing issue. Cleaning it manually is an effective solution. Here’s how to do it:
• Mix a cup of bleach and hot water and pour the solution into the washer.
• Run the machine on a hot cycle.
• Once the cycle is over, wipe the interiors of the drum with a clean towel.
• Do the process again with hot water only to rinse the inside of the machine.
3. Reset the Machine
Resetting the machine is a basic troubleshooting solution that can fix most issues, including the Samsung Washer self-clean flashing issue. Here’s how to reset your Samsung Washer:
• Power off the machine.
• Unplug the cord from the outlet.
• Wait for 1-2 minutes.
• Replug and power on the machine.
4. Contact the Authorized Service Center
If none of the above solutions worked, the Samsung Washer’s self-clean flashing issue might be an underlying cause of a mechanical or electrical fault. The problem needs an expert to diagnose the issue and repair it. It’s best to contact the authorized service center for detailed attention and an ultimate solution.
Conclusion
In conclusion, the Samsung Washer self-clean flashing issue is not an alarming problem, and there’s no reason to panic. Follow the simple guide above to fix the issue step by step. Remember, it’s crucial to maintain the cleanliness and maintenance of your machine for its longevity. If you can’t resolve the flashing issue, contacting Samsung’s authorized service center can provide the best solution for fixing the problem.
Sources:
Samsung Washer Self Clean Flashing: A Comprehensive Guide
What is Samsung Washer Self Clean?
Samsung washers come equipped with a Self Clean cycle that helps in keeping the washer drum clean and free from dirt and bacteria. The cycle involves cleaning the interior of the washer drum with hot water and a high spin speed to remove any residue or build-up. This process also helps to eliminate any odors that may have accumulated within the machine over time.
Why is the Self Clean Flashing?
When the Self Clean cycle is activated on a Samsung washer, the machine displays a flashing light to indicate that the cycle is in progress. However, sometimes the washer may display a flashing Self Clean light even when the cycle is not running. This usually happens when the washer senses that the drum is not clean enough and requires further cleaning.
How to Stop the Self Clean Flashing?
To stop the Self Clean light from flashing, you will need to run the Self Clean cycle once again. This cycle will help to clean any residual dirt and bacteria that may have been left behind during the previous cycle. Once the cycle is complete, the Self Clean light should stop flashing.
It is important to note that if the Self Clean light continues to flash even after running the cycle once again, there may be an issue with the washer’s sensor or control board. In such cases, it is recommended to contact a professional technician to inspect the machine and fix the issue.
Conclusion
The Self Clean feature on Samsung washers is an essential function that ensures the longevity of the machine and the quality of the wash. If you notice the Self Clean light flashing, it is an indication that the machine requires further cleaning. Running the Self Clean cycle once again should resolve the issue in most cases. However, if the light continues to flash, it is recommended to seek professional help.
For more information on Samsung washers and their functions, please visit Samsung Electronics – Wikipedia.
Frequently Asked Questions
What is the self-clean feature on a Samsung washer?
The self-clean feature is a function in Samsung washers that thoroughly cleans the drum to prevent buildup of dirt and mold.
What does it mean when the self-clean light is flashing on my Samsung washer?
If the self-clean light is flashing on your Samsung washer, it indicates that an issue has been detected with the self-clean function. This can be resolved with some simple troubleshooting steps.
How can I fix the self-clean flashing issue on my Samsung washer?
To fix the self-clean flashing issue on your Samsung washer, follow these steps:
- Ensure that the washer is not in use and all buttons are unresponsive.
- Unplug the washer from the power source for at least 30 seconds.
- Plug the washer back in and turn it on.
- Press and hold the “Delay End” and “Drum Light” buttons simultaneously for three seconds to initiate a self-diagnostic test.
- Allow the test to run its course, as it will identify any issues with the machine and potentially fix the self-clean flashing issue.
What should I do if the self-clean flashing issue persists?
If the self-clean flashing issue continues after trying the self-diagnostic test, you may need to contact Samsung’s customer support for further assistance.
Introduction
- This guide is for users of Samsung washers who are experiencing an issue where the “Self Clean” light is flashing.
Possible Causes
- There may be residue built up from detergent, fabric softener, or other additives.
- There may be too much laundry detergent being used.
Steps to Fix the Issue
- Perform a self-clean cycle on the washer by selecting the self-clean cycle option on the control panel.
- Clean the detergent drawer, using a soft brush, to remove any built-up residue.
- Reduce the amount of laundry detergent you’re using during wash cycles.
Conclusion
- By following these simple steps, users can fix the flashing “Self Clean” light issue on their Samsung washers.
